新网资讯

首页 > 新网资讯
路沿石塑料模具如何得到市场发展认可
发布人:管理员   发布时间:2021-7-21

路沿石塑料模具的原材料主要有塑料注塑成型与钣金钢模具成型两种,其中比较常见的就是聚丙烯塑料颗粒状经过注塑机高温处理注入预先准备好的路沿石塑料模腔当中,待经过冷却处理之后成型模具

The main raw materials of well cover mould are plastic injection moulding and sheet metal steel moulding. The most common one is that polypropylene plastic particles are injected into the well cover cavity prepared by injection moulding machine after high temperature treatment, and the moulding die is formed after cooling treatment.


准备好一个下模具,振动平台一台,混合好的混凝土适量.将混合好的混凝土倒入模具内,经振动平台振动30秒左右,去下置于阴凉避光的仓库之内,放置一定的时间大约24小时左右冬季一般放置2-3天

Prepare a lower mold, a vibration platform and a proper amount of mixed concrete. Pour the mixed concrete into the mold. Vibrate the platform for about 30 seconds and put it in a cool and dark warehouse. Place it for about 24 hours in winter, usually for 2-3 days.


最后将混凝土凝固成型之后进行拆模或者脱模成型.随着近几年也相对较长众多客户市政建设的发展,路沿石塑料模具得到了广泛的应用

Finally, demoulding or demoulding of concrete after solidification is carried out. With the development of municipal construction of many customers in recent years, the well cover mould has been widely used.

                                  


并且迅速发展,模具生产工艺也随之成为人们讨论的热点话题,模具的生产都需要注意一些事情的

And with the rapid development of die and mould production technology has become a hot topic of discussion, the production of die and mould need to pay attention to some things.


模具是在我们的周围常见也是广泛应用的,因此对于该模具的注意事项也是不能忽视的一个重要作用,因此,对于模具的制作也是小觑不可得.


Mould is common and widely used around us, so attention to the mold is also an important role that can not be ignored, therefore, the production of the mold is also not available.

上一篇:没有了